After several iterations and months of testing, we are excited to announce the release of our newest module – the AvonSynth AVS-S&R-1 Send and Return module!
We all know that external effects can make a huge difference to a synthesized sound, but routing signals from your modular synth to rack gear, effects units, guitar pedals, and other types of audio equipment can be problematic at best, damaging at worst. Modular synthesizer levels are much higher than other audio equipment, so they need to be stepped down to be used, and brought back up again on the way back in. Many issues can arise, such as distorted audio, unwanted noise added due to the use of unbalanced connections, inability to gain-stage properly, and extra mixers needed for effects blending, not to mention the annoying adapters!
All of these issues can be resolved with the AVS-S&R-1, which utilises true balanced connections, Neutrik 1/4″ sockets, gain staging on the way out and in, dedicated mix knobs, and signal and clip metering. Now, it’s never been easier to combine the strengths of your modular with your external gear to make amazing music!
So if you’re ready for your modular and your external gear to join forces, get your hands on the AvonSynth AVS-S&R-1 Send & Return module today!
New Professional Output Module Released!
After much development, we are thrilled to announce the release of our newest module – the AVS-OUTPUT-1 Professional Output Module!
This module is truly the icing on the cake of any high-end modular setup. By converting your unbalanced modular-level signal to balanced TRS and XLR +4dBu professional line level outputs, you can ensure that you connect your modular to the outside world with the utmost in audio quality, lowest noise, and with the most reliable connection. Whether you’re in the studio or on tour, the AVS-OUTPUT-1 provides accurate gain-staging with manually calibratable LED level bars, switchable metering response, and a dedicated headphone amplifier!
So if you’re ready to go pro with your modular, get your hands on the AVS-OUTPUT-1 Professional Output Module today!
New Professional Output Module Released!
After much development, we are thrilled to announce the release of our newest module – the AVS-OUTPUT-1 Professional Output Module!
This module is truly the icing on the cake of any high-end modular setup. By converting your unbalanced modular-level signal to balanced TRS and XLR +4dBu professional line level outputs, you can ensure that you connect your modular to the outside world with the utmost in audio quality, lowest noise, and with the most reliable connection. Whether you’re in the studio or on tour, the AVS-OUTPUT-1 provides accurate gain-staging with manually calibratable LED level bars, switchable metering response, and a dedicated headphone amplifier!
So if you’re ready to go pro with your modular, get your hands on the AVS-OUTPUT-1 Professional Output Module today!
KiwiRails and Threaded Inserts Released!
Happy King’s Birthday weekend everyone!
And to celebrate, we’re releasing the king of all Eurorack rails, the KiwiRail to the public! These custom designed and built Eurorack synthesizer rails come in beautiful Silver and Black anodized finishes, and support all 6, 8, and 10mm length M3 mounting screws. The ends of the rails are tapped for standard M4 fittings. These come in 84HP length as standard, but we can cut these to any length desired, from very short, to very long!
We are also releasing our own stainless steel Threaded Insert strips (which fit in these rails) for purchase alongside these. They are M3 tapped every HP to make your synthesizer fitting as solid, and as easy as possible. They also come as 84HP strips as standard, but we can cut custom lengths for you shorter than this, and multiple lengths can be combined for longer rails. For more information and pricing, just check the KiwiRails and Threaded Inserts page.
New Dual Ring Modulator Released!
After long wait, we’re thrilled to announce the AVS-RING-1, Dual Ring Modulator module! Quite possibly the most flexible ring modulator available, this unit contains two independent and very different ring modulators with customizability built in.
On the left is the Discrete modulator, a classic circuit based on the original ‘diode ring’ topology, with real transformers used in conjunction with four replaceable diodes to create an edgy, raw, and very characterful ring-mod effect. The musical timbre of this circuit is heavily influenced by the type of diodes inserted on the rear of the unit. Germanium diodes give a smoother, rolled-off tone, silicon diodes (supplied) provide a brighter, more clippy tone. You could even try experimenting with using different colours of LEDs or other types of diodes!
On the right is the Integrated modulator. This side uses a modern, high-end integrated-circuit based topology that delivers a much more precise and slick ring-modulated sound. This side also has much lower cross-talk characteristics. With individual input attenuators for all inputs, and dedicated wet/dry mix knobs for each modulator, the AVS-RING-1 has everything you need for endless experimentation with a wide variety of effects.
TheMIDI to CV Module is Back!
After a long absence due to the microchip shortage, the AvonSynth AVS-MIDI-1 MIDI to CV module is back and available to order now!
This very flexible module offers everything you need to get your MIDI notes, velocities, modulation, aftertouch, and continuous controller messages from your keyboard or sequencer to your modular. At just 10HP, but with 4 channels of gate, pitch, and velocity outputs, you can control up to 4 independent or polyphonic voices, and with the built-in MIDI Thru port, you can chain multiple units to achieve large numbers of voices and massive amounts of control!
Not only that, but the module also sports a tuning input that allows you to get all of your analogue VCOs in beautiful equal-tempered A=440 tuning to play nicely in tune with each other, as well as other instruments. And now with Revision 4, MIDI Tuning Standard bulk dumps are now supported, so it’s now possible to tune to any scale imaginable!
For more information about this module’s specs and capabilities check out its Product page, and to order or just ask us questions, get in touch via the Contact page.
AvonSynth Gnarlies and Snowflake released!
We have two new accessories available for your patching pleasure!
First of all, we have specially designed a new 10mm M3 knurled thumb-screw specifically for Eurorack modular synthesizers. We call them Gnarlies, and they make arranging and rearranging your modules without a screwdriver a breeze! Find out more here.
We’ve also created a very special holder for all of your patch cables that we call the Snowflake. Crafted from solid 3mm-thick steel, it mounts to a microphone stand, and is built with a bearing that allows it to rotate freely. With a diameter less than that of a 12″ record, a single Snowflake can hold up to 450 5mm-thick patch cables! Learn more about it here.
You may have seen these beautiful steel cases in the wild at a number of prominent studios and education facilities around the country, but now that we’ve been able to fulfil all of our pre-orders, we are ready to release these magnificent creations to the public!
The AVS-CASE-1 is an 84HP Eurorack-style modular synthesizer case of solid steel construction, with removable 19″ ears for standard racks. They are built with lipped rails, loaded with custom, stainless steel threaded inserts, and every case comes with a custom-built precision-tuned linear power supply and toroidal transformer to cover all of your power needs with the lowest noise and interference. There are 18 power slots included (upgradable to 25), and each case comes with removable panels and symmetrical mounting holes for attaching multiple cases, so that your cases can grow as your system grows!
For more information, check out the AVS-CASE-1 page, or to ask questions or place an order, click here.
New Creative VC-LFO Module Released!
Our brand new, fully analogue voltage-controlled LFO module (AVS-LFO-2) has been released at long last!
After a lengthy development, we’ve finally come up with our dream VC-LFO, and we can’t wait to share it with the world. It provides very precise frequency control via Frequency, Fine-tune, attenuated CV, and a 3-position speed range switch, and it provides smooth sine, sweeping triangle, and sharp pulse waves. But what really sets this module apart is that not only can all of these outputs be skewed left and right with the skew knob, but the skew parameter can be CV controlled, with it’s own attenuator, all in the analogue domain! In addition, the reset input provides a smooth analogue reset of the waveform toward the ground, and the direction of travel after reset is set with the +/- switch.
This module is a blast to experiment with, and the creative possibilities are extensive.
For more information about this module’s specs and capabilities check out its Product page, and to order or just ask us questions, get in touch via the Contact page.
VC Crossfade / Panner Module Now Available!
Our brand new voltage-controlled crossfade and panner module (AVS-XFADE-1) is now available and ready to order!
This fully analogue module takes two inputs, and provides a mix of the two signals whose balance is dictated by the position of the Fade knob, which acts similar to the crossfader on a DJ mixer. In addition, the fader position can be controlled by voltage sent to the CV input, which can also be attenuated by the CV knob. This allows not only slowly morphing of sounds, but also creative audio-rate modulation, creating entirely new timbres.
Connected to the same fader mechanism, left and right panoramic outputs are also provided. This allows you to pan a signal from left to right under voltage control – creating stereo movement and tremolo effects.
For more information about this module’s specs and capabilities check out its Product page, and to order or just ask us questions, get in touch via the Contact page.
MIDI to CV Module Rev 4. Released!
After lengthy development and user-testing processes, the brand new Revision 4 of our AVS-MIDI-1 4-channel MIDI to CV conversion module is released!
This very flexible module offers everything you need to get your MIDI notes, velocities, modulation, aftertouch, and continuous controller messages from your keyboard or sequencer to your modular. At just 10HP, but with 4 channels of gate, pitch, and velocity outputs, you can control up to 4 independent or polyphonic voices, and with the built-in MIDI Thru port, you can chain multiple units to achieve large numbers of voices and massive amounts of control!
Not only that, but the module also sports a tuning input that allows you to get all of your analogue VCOs in beautiful equal-tempered A=440 tuning to play nicely in tune with each other, as well as other instruments. And now with Revision 4, MIDI Tuning Standard bulk dumps are now supported, so it’s now possible to tune to any scale imaginable!
For more information about this module’s specs and capabilities check out its Product page, and to order or just ask us questions, get in touch via the Contact page.
